فهرست:
ندارد.
منبع:
[1] Hamada, H., Fukute, T., and Yamamoto, K., “Bending Behavior of Unbounded Prestressed Concrete Beams Prestressed with CFRP Rods,” Fiber Reinforced Cement and Concrete, Proceedings of the Fourth RILEM International Symposium, Sheffield, 1992, pp. 1015-1026.
[2] Saadatmanesh, H., and Ehsani, M. R., “RC Beams Strengthened with GFRP Plates, I: Experimental Study,” Journal of Structural Engineering, ASCE, Vol. 117, No. 11, 1991, pp. 3417-3433.
[3] Bedard, Claude, “Composite Reinforcing Bars: Assessing Their Use in Concrete,” Concrete International, 1992, pp. 55-59.
[4] Sharp, B. N., “Reinforced and Prestressed Concrete in Maritime Structures,” Proceedings of the Institution of Civil Engineers, Structures and Building, Vol. 116, No. 3, 1996, pp. 449-469.
[5] Hamid, Ahmad A., “Improving Structural Concrete Durability in the Arabian Gulf,” Concrete International, July, 1995, pp. 32-35.
[6] Ali, Mohammed Gholam, Dannish, Sami Abdulla, and Al-Hussaini, Adel, “Strength and Durability of Concrete Structures in Bahrain,” Concrete International, July, 1996, pp. 39-45.
[7] Matta, Z., “Chlorides and Corrosion in the Arabian Gulf Environment,” Concrete International, May, 1992, pp. 47-48.
[8] Matta, Z., “Deterioration of Concrete Structures in the Arabian Gulf,” Concrete International, Juky, 1993, pp. 33-36.
[9] Matta, Z., “More Deterioration of Reinforced concrete in the Arabian Gulf,” Concrete International, November, 1993, pp. 50-51.
[10] Razaqpur, A. G., and Kashef, A. H., “State-of-the-Art on Fiber Reinforced Plastics for Buildings,” Submitted to: Institute for Research in Construction – National Research Council of Canada, Carleton University, Ottawa, 1993.
[11] Rostasy, F. S., “FRP Tensile Elements for Prestressed Concrete – State of the Art, Potentials and Limits,” Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, International Symposium, ACI-SP-138, 1993, pp. 347-366.
[12] Minosaku, Koichi, “Using FRP Materials in Prestressed Concrete Structures,” Concrete International, 1992, pp.41-45.
[13] Erki, M. A., and Rizkalla, S. H., “Anchorages for FRP Reinforcement,” Concrete International, 1993, pp. 54-59.
[14] Martin, Roderick H., “Fiber Reinforced Plastic Standards for the Offshore Industry,” SAMPE Journal, Society for the Advancement of Material and Process Engineering, 1996, pp. 37-41.
[15] Yamasaki, Y., Masuda, Y., Tanano, H., and Shimizu, A., “Fundamental Properties of Continuous Fiber Bars,” Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, International Symposium, ACI-SP-138, 1993, pp. 715-730.
[16] Tarricone, Paul, “Plastic Potential,” Civil Engineering, 1993, pp. 62-64.
[17] Ehsani, M. R., Saadatmanesh, H., and Tao, S., “Bond of GFRP Rebars to Ordinary- Strength Concrete,” Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, International Symposium, ACI-SP-138, 1993, pp. 333-346.
[18] Char, M. S., Saadatmanesh, H., and Ehsani, M. R., “Concrete Girders Externally prestressed with Composite Plates,” PCI Journal, 1994, pp. 40-51.
[19] Mashida, M., and Iwamoto, K., “Bond Characteristics of FRP Rod and Concrete After Freezing and Thawing Deterioration,” Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, International Symposium, ACI-SP-138, 1993, pp. 51-70.
[20] Hahn, H. T., and Kim, R. Y., “Swelling of Composite Laminates,” Advanced Composite Materials-Environmental Effects, ASTM-STP 658, 1978, pp. 98-130.
[21] Mallick, P. K., Fiber Reinforced Composites, Marcel Dekker, Inc., New Yoek, 1988.
[22] Burnsell, A. R., “Long-Term Degredation of Polimeric Matrix Composites,” Concise Encyclopedia of Composite Materials, Pergamon Press, 1989, pp. 165-173.
[23] Dewimille, B., and Burnsell, A. R., “Accelerated Aging of a Glass Fiber Reinforced Epoxy Resin in Water,” Composites, 1983, pp. 14-35.
[24] Dutta, P. K., “Tensile Strength of Unidirectional Fiber Composites at Low Temparatures,” Proceedings, Sixth Japan-U.S. Conference on Composite Materials, June, 1983, Orlando, pp. 782-792.
[25] Lord, H. W., and Dutta, P. K., “On the Design of Polymeric Composite Structures for Cold Region Applications,” Journal of Reinforced Plastics and Composites, Vol. 7, 1988, pp. 435-450.
[26] Larsson, F., “The Effect of Ultraviolet Light on Mechanical Properties of Kevlar 49 Composites,” Environmental Effects on Composite Materials, Technomic Publishings Co., 1988, pp. 132-135